HP POD 40c G2 Maintenance And Service Manual page 25

Header drain pan sensor
Route the wire through the flex tubing to the associated zone satellite box.
2.
Connect the sensor wire to the appropriate port on the satellite box terminal.
3.
Heat exchanger drain pan sensor
-or-
Header drain pan sensor
If you are replacing a heat exchanger drain pan sensor, do the following:
4.
Replace the fan bank you removed, if applicable. For more information, see "Replacing the fan
a.
bank (on page 41)."
Replace the fan you removed, if applicable. For more information, see "Replacing the fan (on page
b.
39)."
Removal and replacement procedures 25