Pneumatic Dispensing Edge -38; V-Shape Dispensing Edge -38 - Novexx Solutions ALX 73 Series User Manual

ALX 73x
User Manual
Pneumatic dispensing edge
The dispensing edge can be rotated in the dispensing
head. Compressed air presses the dispensing edge
onto the surface of the product.
This makes it possible to compensate for differences in
height between products or on the surface of the
product.
V-shape dispensing edge
The length-adjustable V-shape dispensing edge [19]
offers an additional opportunity to adapt the machine to
the application.
Adjustable dispensing edge holders
L-shape dispensing edges can be mounted with the
fixed (standard) dispensing edge holder, or with one of
the two optionally available adustable holders.
• The finely adjustable dispensing edge holder [20A]
can be adjusted by means of an adjusting spindle
in steps of 0.2 mm.
• The „normally" adjustable dispensing edge holder
[20B] offers a larger setting range, which can be fur-
ther extended by installing longer rods into the hold-
er.
08/2017 | 0
[18] Pneumatic dispensing edge
[19] V-shape dispensing edge.
A
[20] Adjustable dispensing edge holder.
38
B
Product description