Dispensing Module -25; Variables -25; Label Sensor -25; Interfaces -25 - Novexx Solutions ALX 73 Series User Manual

ALX 73x
User Manual
DISPENSING MODULE
Variables
• Dispensing speed: Up to 50 m/min
• Label stop accuracy on the dispensing plate
– At a constant dispensing speed: ± 0.5 mm
– At a variable dispensing speed (range of 5-50 m/min): ±1.0 mm
• Speed control: Fixed setting or automatic speed adaptation via encoder
Label sensor
• Sensor type: Transmission sensor; NPN/PNP (switchable)
• Distance from the dispensing plate: L-shape dispensing edge: 19 mm
Interfaces
Data interfaces
Interface
Serial
Ethernet
USB
Memory card
Control panel
interface
[Tab. 12] Data interfaces on the ALX 73x dispensing module.
1) Gen. 2: Not yet supported with firmware version 2.51
Signal interfaces
Interface
Applicator
interface
PLC interface
[Tab. 13] Signal interfaces on the ALX 73x dispensing module.
1) Configuration option „full"
10/2020 | 04
Details
RS 232C (Sub-D9), 300 -115200 baud
10/100 Base T (RJ45)
• Device V1.1, USB B, 'Full speed' operating mode, 12 MBit/s
• Host, USB-A
1)
Slot for 1 SD/MC card
RS 485 (Mini DIN 6-plug) for remote control panel
Details
Optional (AI board): control signals for applicators
Sub-D15, optically insulated, optionally
outputs separated)
Outputs: 4x PNP (high side drive), 24 V, max. 500 mA/channel, total
permissible output current: 1500 mA
Inputs: 3x PNP/NPN, 24 V
25
1
via two 8-pin M12s (inputs/
1
Technical Data