[Authentication Device Settings] - [General Settings]; [Pki Settings] - [Device Certificate]; [Pki Settings] - [Ssl/Tls Settings] - Olivetti d-COLOR P3100 Manual

1.5 Available operations in Administrator mode

[Authentication Device Settings] - [General Settings]

To display: Administrator mode - [Security] - [Authentication Device Settings] - [General Settings]
(To display this menu, the setting by your service engineer is required. For details, contact your service rep-
resentative. )
Configure the setting relevant to IC card authentication.
Item
[Authentication Type]
Tips
-
This function is available when an optional Hard Disk is installed.
-
If this menu is changed, the card information saved on this machine is deleted.

[PKI Settings] - [Device Certificate]

To display: Administrator mode - [Security] - [PKI Settings] - [Device Certificate]
You can self-create a new certificate of this machine or install a certificate issued by the Certificate Authority
(CA).
For details, refer to page 2-8.

[PKI Settings] - [SSL/TLS Settings]

To display: Administrator mode - [Security] - [PKI Settings] - [SSL/TLS Settings]
Select whether or not to enable SSL communication. Also select the SSL encryption strength.
Item
[SSL/TLS]
[Encryption Strength]
[SSL/TLS Version]
d-COLOR P3100
Description
Select how to log in to this machine.
• [Card Authentication]: Allows the user to log in by simply placing the IC
card.
The setting value is fixed to [Card Authentication].
Description
Select whether or not to enable SSL communication.
[Disable] is specified by default.
Select the SSL encryption strength. Select the appropriate strength to suit your
environment.
[AES-256, 3DES, RC4-128] is specified by default.
Select the version of the SSL to be used. Select the appropriate version to suit
your environment.
1
1-21