Configuring The Default Settings Of The Printer Driver; [Options Installed]; [General] - Olivetti d-COLOR P3100 Manual

5
5.2.3

Configuring the default settings of the printer driver

When you use this machine for the first time, properly configure the printer driver so that it contains informa-
tion such as the options installed on this machine. If necessary, you can change the default print settings of
the printer driver.
Tips
- The name and display order of the settings vary depending on your operating system, its version, or the
CUPS version.
- The following describes the print functions unique to this machine.
1
Start the Web browser.
2
Enter "http://localhost:631" in the URL field.
3
Click [Manage Printer].
4
Click [Set Printer Options].
The printer drive setup page appears.

[Options Installed]

Item
[Paper Source Unit]
[Hard Disk]
NOTICE
You cannot use the optional functions unless the name of this machine and installed options are specified. If
any option is installed, be sure to specify it.

[General]

Item
[Collate]
[Paper Source]
[Paper Type]
[Resolution]
[Paper Size]
[Nearest Size and
Scale]
[Print Type]
[Orientation]
[Binding Position]
[Select Color]
5-6
Description
Select the paper feed unit that is installed on this machine.
[None] is specified by default.
Select whether or not the Hard Disk is installed on this machine.
[None] is specified by default.
Description
When printing multiple sets of copies, select this check box to output sets of
copies one by one.
This function is available when an optional Hard Disk is installed.
[On] is specified by default.
Select the paper tray for the printing paper.
Select the paper type used for printing.
Select the print resolution.
[600dpi] is specified by default.
Select the size of paper for printing.
Select whether or not to use paper of the appropriate size by automatically en-
larging or reducing the original data if the size of sheets of the paper loaded in
the paper tray does not match that of original data.
[Off] is specified by default.
Select the print sides of paper.
[2-Sided] is specified by default.
Specify the orientation of the original.
[Portrait] is specified by default.
Select the binding position.
[Left Bind] is specified by default.
Select colors for printing.
[Auto Color] is specified by default.
Preparation for printing
d-COLOR P3100
5.2