[Default Settings] - [Pcl Settings] - Olivetti d-COLOR P3100 Manual

1

[Default Settings] - [PCL Settings]

To display: Administrator mode - [Print] - [Default Settings] - [PCL Settings]
Configure the PCL settings.
Item
[PCL Settings]
[Font Number]
[Symbol Set]
[Lines Per Page]
[Font Point Size]
[Font Pitch Size]
[CR/LF Mapping]
[Print Quality Settings]
[Contrast]
[Image Printing]
[Text Printing]
[Graphics Printing]
1-34
Available operations in Administrator mode
Description
Specify the default values for PCL printing.
Specify the default font. The displayed font number corresponds to the PCL
font list.
[0] is specified by default.
Select the font symbol set to be used.
[PC-8] is specified by default.
Enter the number of lines of text data to be printed on one page.
The default value depends on the region the machine is used in.
Enter the font size (in points) for proportional fonts (with different widths for
each character).
[12.00] is specified by default.
Enter the font width (in pitches) for typewriter fonts (with the same width for
each character).
[10.00] is specified by default.
Select whether or not to replace the line feed codes when printing text data.
When you want to replace the line feed codes, select the replacement method.
[CR=CR LF=LF] is selected by default.
Adjust the image quality for PCL printing.
Adjust the contrast of the printed image.
[0] is specified by default.
Select the RGB image data processing method.
• [Source]: Specify the color space of the input RGB. [sRGB] is specified by
default.
• [Intent]: Specify the color conversion property that is changed from input
RGB to device CMYK. [Photographic] is specified by default.
• [Gray Treatment]: Specify the printing method of black and gray colors.
[Composite Black] is specified by default.
Select the RGB text data processing method.
• [Source]: Specify the color space of the input RGB. [sRGB] is specified by
default.
• [Intent]: Specify the color conversion property that is changed from input
RGB to device CMYK. [Vivid] is specified by default.
• [Gray Treatment]: Specify the printing method of black and gray colors.
[Black and Gray] is specified by default.
Select the RGB graphic data processing method.
• [Source]: Specify the color space of the input RGB. [sRGB] is specified by
default.
• [Intent]: Specify the color conversion property that is changed from input
RGB to device CMYK. [Vivid] is specified by default.
• [Gray Treatment]: Specify the printing method of black and gray colors.
[Black and Gray] is specified by default.
1.5
d-COLOR P3100