Olivetti d-COLOR P3100 Manual page 52

1
Item
[Read Community
Name]
[Write]
[Write Community
Name]
[SNMP v3 Settings]
[Context Name]
[Discovery]
[Discovery User
Name]
[Read User Name]
[Security Level]
[auth-password]
[priv-password]
[Write User Name]
[Security Level]
[auth-password]
[priv-password]
[Encryption Algo-
rithm]
[Authentication
Method]
[Trap Settings]
[Allow Setting]
[Trap Setting When
Authentication
Fails]
1-46
Available operations in Administrator mode
Description
Enter a read-only community name (using ASCII characters of up to 15 bytes,
excluding spaces, \, ,' ,", and #).
[public] is specified by default.
Select whether or not to enable the read and write functions.
[Enable] is specified by default.
If [Write] is set to [Enable], enter the community name in the read-write enable
state (using ASCII characters of up to 15 bytes, excluding spaces, \, ,' ,", and
#).
[private] is specified by default.
Configure the SNMP v3 settings.
Enter a context name (using ASCII characters of up to 63 bytes, excluding
spaces, \, ,' ,", and #).
Select whether or not to allow a user for detection.
[Enable] is specified by default.
If [Discovery] is set to [Enable], enter a user name for detection (using ASCII
characters of up to 32 bytes, excluding spaces, \, ,' ,", and #).
[public] is specified by default.
Enter a read-only user name (ASCII characters of up to 32 bytes, excluding
spaces, \, ,' ,", and #).
[initial] is specified by default.
Select a security level for the read-only user.
[Auth-password/Priv-password] is specified by default.
Enter an authentication password for the read-only user (using ASCII charac-
ters between 8 and 32 bytes, excluding spaces, \, ,' ,", and #).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
Enter a privacy password for the read-only user (using ASCII characters be-
tween 8 and 32 bytes, excluding spaces, \, ,' ,", and #).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
Enter a user name used by the read and write user (using ASCII characters of
up to 32 bytes, excluding spaces, \, ', ", and #).
[restrict] is specified by default.
Select a security level of the read and write user.
[Auth-password/Priv-password] is specified by default.
Enter an authentication password for the read and write user (using ASCII
characters between 8 and 32 bytes, excluding spaces, \, ,' ,", and #).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
Enter a privacy password for the read and write user (using ASCII characters
between 8 and 32 bytes, excluding spaces, \, ,' ,", and #).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
Select an encryption algorithm.
[DES] is specified by default.
Select an authentication algorithm.
[MD5] is specified by default.
Configure the settings on the SNMP TRAP function.
Select whether or not to allow a notification of the status of this machine using
the SNMP TRAP function.
[Enable] is specified by default.
Select whether or not to send TRAP when authentication fails.
[Disable] is specified by default.
1.5
d-COLOR P3100