Kanmor Mixing Control 362e Data Brochure page 22

RTU Monitor Menu (1 of 1)
Item Field
RTU Schd (Schedule) Menu (1 of 1)
Note: = The Item is set to, ≠ The Item is not set to
Item Field
RTU Misc (Miscellaneous) Menu (1 of 1)
Note: = The Item is set to, ≠ The Item is not set to
Item Field
© 2003 D 362e - 06/03
Access
Level
The highest outdoor air temperature recorded
since this item was last cleared.
To clear, press & hold the
The lowest outdoor air temperature recorded
since this item was last cleared.
To clear, press & hold the
The highest room air temperature recorded
since this item was last cleared.
To clear, press & hold the
The lowest room air temperature recorded
since this item was last cleared.
To clear, press & hold the
Access
Level
The type of setback override that is in effect.
B1
DIP switch = Setback
HOL is available even if DIP ≠ Setback
Access
Level
The units of measure that all of the temperatures are to
be displayed with the RTU.
The operating mode for the back lighting on the LCD
as well as the time of keypad inactivity until the RTU,
automatically returns to the View menu.
BACKLITE = OFF (returns after 10 seconds)
BACKLITE = 30 sec (returns after 30 seconds)
BACKLITE = ON (returns after 90 seconds)
The access level that is to be used by the RTU.
DIP switch = Unlock
Description
& buttons
& buttons
& buttons
& buttons
Description
Description
22 of 32
Actual
Range
Setting
-67 to 149°F
(-55 to 65°C)
-67 to 149°F
(-55 to 65°C)
14 to 167°F
(-10 to 75°C)
14 to 167°F
(-10 to 75°C)
Range
NONE, TMPY Occ Ovr,
PERM Occ Ovr, TEMP
UnOcc Ovr, PERM
UnOcc Ovr, HOL Ovr
Default = NONE
Range
°F, °C
Default = °C
OFF, 30 sec, ON
Default = 30 sec
ADV, INST, USER,
LTD
Default = INST