Dip Switch Settings; Access Levels - Kanmor Mixing Control 362e Data Brochure

DIP Switch Settings

The DIP Switch settings on the control are very important and should be set to the
appropriate settings prior to making any adjustments to the control through the User
Interface. The DIP switch settings change the items that are available to be viewed
and / or adjusted in the User Interface.
If the setback / None DIP switch is changed while the control is powered up, the control
responds to the change in setting by returning the display to the View Menu.
LOCK / UNLOCK (FACTORY SETTING IS UNLOCK)
The Lock / Unlock DIP switch is used to lock and unlock the access level of the control and tN1/tN2 device. To determine if the
control is currently locked or unlocked, a small segment representing a padlock is viewed in the bottom right hand corner of the
display. When the padlock is closed, the access level cannot be changed.
To change the access level, set the DIP switch to the Unlocked, or down position. The current access level of the control or
tN1/tN2 device is viewed in its Miscellaneous (Misc) Menu. While viewing the access level, use the
between the Limited (LTD), User (USER), Installer (INST), or Advanced (ADV) access levels.
To lock the access level, select the appropriate access level in the Miscellaneous (Misc) Menu and move the DIP switch from
the unlocked position to the locked position. As long as the DIP switch is in the locked position, the access level of the control or
tN1/tN2 device can no longer be viewed or adjusted in its Miscellaneous (Misc) Menu.
SETBACK / NONE (FACTORY SETTING IS NONE)
The Setback / None DIP switch enables and disables the setback functions of the control. When the DIP switch is set to the None or
down position, the control ignores any external setback signal, and its user interface does not display the UnOccupied adjustments.
When the DIP switch is set to the Setback position, the setback features in the control are enabled. The control responds to an
external setback signal generated on the UnO Sw terminal.

Access Levels

The kanmor Mixing Control 362e comes with four Access Level set-
tings. These Access Levels restrict the number of Menus, Items,
and Adjustments that can be accessed by the user. The four ac-
cess levels are Limited (LTD), User (USER), Installer (INST) and
Advanced (ADV).
The access level of the control is found in the Miscellaneous (Misc)
Menu when the Lock / Unlock DIP switch is set to the Unlocked
position. In the Advanced access level, all of the control settings
are available to the user. In the User access level, only a few of the
menus and items are available. The Limited access level is the most
restricted of them all. The control's factory setting is Installer (INST).
This access level is suffi cient for the normal set up of the control.
Once the control is set up, the appropriate access level should be
selected for the people that deal with the control on a regular basis.
© 2003 D 362e - 06/03 16 of 32
Setback
None
and keys to select