Table of Contents
Advertisement
Schd (Schedule) Menu (1 of 1)
Note: = The Item is set to, ≠ The Item is not set to
Item Field
Misc (Miscellaneous) Menu (1 of 1)
Note: = The Item is set to, ≠ The Item is not set to
Item Field
Room Temperature Units (RTUs) 062e and 063e
RTU View Menu (1 of 2)
Note: = The Item is set to, ≠ The Item is not set to
Item Field
© 2003
D 362e - 06/03
Access
Level
The type of setback override that is in effect for the
heating system.
B1
DIP switch = Setback
HOL is available even if DIP ≠ Setback
Access
Level
The units of measure that all of the temperatures are to be
displayed in by the control.
The operating mode for the back lighting on the LCD as well
as the time of keypad inactivity until the control automatically
returns to the default display.
BACKLITE = OFF (returns after 10 seconds)
BACKLITE = 30 sec (returns after 30 seconds)
BACKLITE = ON (returns after 90 seconds)
The access level that is to be used by the control.
DIP switch = Unlock
A single RTU may be connected to the Mixing Control 362e in order to provide the control with
indoor temperature feedback for the mixing side of the heating system. When using an RTU, several
items related to the mixing side of the heating system are no longer available in the control's User
Interface. These items are available only in the RTU's User Interface. Also, the number of items that
are available on the RTU depends on the type of RTU that is connected to the control.
Access
Level
Current room air temperature.
B2
RTU SENS = AIR
Target room air temperature.
B2
RTU SENS = AIR
Description
Description
Description
20 of 32
Range
NONE, TMPY Occ
Ovr, PERM Occ Ovr,
TEMP UnOcc Ovr,
PERM UnOcc Ovr,
HOL Ovr
Default = NONE
Range
°F, °C
Default = °C
OFF, 30 sec, ON
Default = ON
ADV, INST, USER,
LTD
Default = INST
Range
– – –, 14 to 167°F
(– – –, -10 to 75°C)
– – –, 35 to 100°F
(– – –, 2 to 38°C)
Advertisement
Table of Contents
