Table Of Contents; User Interface - Kanmor Mixing Control 362e Data Brochure

Table of Contents

How To Use The Data Brochure

This brochure is organized into four main sections. They are: 1) Sequence of Operation, 2) Installation, 3) Control Settings, and

4) Troubleshooting. The Sequence of Operation section has three sub sections. We recommend reading Section A: General

Operation, as this contains important information on the overall operation of the control. Then refer to the sub sections that apply

to your installation.

The Control Settings section of this brochure illustrates the menu screens that are built into the control. These menu settings are

referenced to the speciﬁ c section in the Sequence of Operation.

User Interface..................................................Pg 2

Description of Display Elements ..................Pg 3

Sequence of Operation ..................................Pg 4

Section A: General Operation ..............Pg 4

Section B: Mixing Reset .......................Pg 5

Section C: Boiler Operation .................Pg 9

Installation.......................................................Pg 11

Electrical Connections..........................Pg 12

Testing the Wiring..................................Pg 14

DIP Switch Settings........................................Pg 16

Access Levels .................................................Pg 16

User Interface

The 362e uses a Liquid Crystal Display (LCD) as the method of supplying information. You use the LCD in order to setup and

monitor the operation of your system. The 362e uses four push buttons (Menu, Item,

As you program your control, record your settings in the actual settings column of the Adjust Menu. The table is found in the

second half of this brochure.

All of the items displayed by the control are organized into various

menus. These menus are listed on the left hand side of the display

(Menu Field). To select a menu, use the Menu button. By pressing

and releasing the Menu button, the display will advance to the

next available menu. Once a menu is selected, there will be a

group of items that can be viewed within that menu.

Item

The abbreviated name of the selected item will be displayed in the

item field of the display. To view the next available item, press and

release the Item button. Once you have reached the last available

item in a menu, pressing and releasing the Item button will return

the display to the first item in the selected menu.

Adjust

To make an adjustment to a setting in the control, begin by

selecting the appropriate menu using the Menu button. Then

select the desired item using the Item button. Finally, use the

and / or

button to make the adjustment.

Additional information can be gained by observing the Status field of the LCD. The status field will indicate which of the control's

outputs are currently active. Most symbols in the status field are only visible when the View Menu is selected.

D 362e - 06/03

Control Settings..............................................Pg 17

View Menu ..............................................Pg 17

Adjust Menu ...........................................Pg 18

Schedule Menu ......................................Pg 20

Miscellaneous Menu .............................Pg 20

RTU Menu ...............................................Pg 20

Testing and Troubleshooting ........................Pg 23

Monitor Menu .........................................Pg 25

Error Messages......................................Pg 26

Technical Data ................................................Pg 32

Limited Warranty ............................................Pg 32

2 of 32

) for selecting and adjusting settings.

Item

Table of Contents

Table Of Contents; User Interface - Kanmor Mixing Control 362e Data Brochure