Setting Parameters Of The Reader Module; Configurable Parameters; Reader Module Parameters Setting - TECHFASS APS mini Plus MREM 65 Series User Manual

5 Setting parameters of the reader module

5.1 Configurable parameters

Parameter
Door lock release time
Door lock control setting
Door lock output function setting
Permanent door lock release according to
a time schedule
Door lock status indication
Acoustic signal of door lock release
Door ajar time
First input configuration
Second input configuration
Third input / output port
Acoustic signalization time - Tamper
Acoustic signalization time - Forced door
Acoustic signalization time – Door ajar
Acoustic signalization time – APB alarm
Signalization time – Card alarm
Antipassback function setting
Automatic summer time adjustment
Release lock with REX button while
tamper alarm active
Online authorization timeout
Standalone authorization after timeout
Saving events in
the module's
archive

5.2 Reader module parameters setting

Detailed instructions for setting reader module parameters are described in the
configuration
http://www.techfass.cz/files/m_aps_miniplus_reader_en.pdf.
Door opened
Door closed
Input 2 On
Input 2 Off
Strike released
Strike closed
program user's
Possible range
0  255 s
Direct / reverse
Standard / toggle / pulse
Never / Schedule index
YES / NO
YES / NO
0  255 s
Door contact / REX button
REX button / handle contact
/ external tamper / tamper /
disabling function
Tamper / ext. buzzer signal
/ disabling function / reading
synchronization
0  255 s
0  255 s
0  255 s
0  255 s
0  255 s
See chapter 6.10
YES / NO
YES / NO
0  25500 ms
YES / NO
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Table 8: Configurable parameters
guide available
Page 8
Default setting
7 s
Direct
Standard
Never
NO
YES
20 s
Door contact
REX button
Tamper
30 s
30 s
0 s
0 s
30 s
Disabled
YES
YES
800 ms
YES
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
APS Reader
at the address