Table of Contents
Advertisement
6.7.3 Deleting cards „above or below"
If a user loses his ID medium, it is usually impossible to delete the ID from the memory with
the procedure described in the previous chapter, since the medium is no longer available
(with an exception of entering the code at the keypad). Following procedure can be used for
deleting such ID. The procedure
before or right after the ID
Step 1
Read the programming card
for inserting: the reader goes
into
programming
which is indicated by slow
flashing of yellow LED.
Step
4 - A
For deleting an ID located
right before
the ID used in
precious
step,
programming
card
deleting.
requires using an ID
medium, which should be deleted.
Step 2
Read the programming card
for inserting 5 times in a row;
mode,
the
reader
Deleting cards "above or
below"
mode indicated by fast
flashing of yellow LED.
Step
4 - B
For deleting an ID located
right after
read
the
precious
for
programming
inserting.
Page 14
medium, which was inserted
will
go
into
the ID used in
step,
read
the
card
for
Pic.5 c): Deleting cards "above or below"
Step 3
Read a card, which is located
in the module's memory
before or right after
the card
you wish to delete. After this
step
the
module
flashes with yellow LED
Step 5
The reader module goes back
into
standard
operating
mode.
right
right
quickly
Advertisement
Table of Contents
