Dynamic DX Installation Manual page 8

!
Detection of broken steering position feedback potentiometer connections or
short circuit of the potentiometers` terminals.
!
Driving inhibit if Steering Module is not connected and responding.
!
Compliance with ISO 7176 requirements.
!
Controlled power down in event of DXBUS disconnection or communication
failure.
!
Hazard lights can be operated by an external switch.
!
Hazard lights will operate automatically if communication with the DX Remote
is lost while turned on.
!
Indicator flash rate will double if a rear indicator bulb has failed.
!
Side lights will come on if battery charger is over-charging the batteries or
during regenerative braking if the battery cannot absorb the regenerated power.
3 General Description
No. 60027, Issue 4. January 1998
5