Table of Contents
Advertisement
User Manual Modbus Slave / HART Master
Document code: MN67908_ENG
Revision 1.001
Page 12 of 32
Industrial Electronic Devices
ETHERNET:
The updating of the converters must be made using Connector4 of the HD67908-X-A1 with at least a Category 5E cable. The maximum
length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To
connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is recommended
the use of a cross cable.
ADFweb.com S.r.l.
Advertisement
Table of Contents
