Vdl200 Power Section Wiring; Vdl200: Power Line - Motor- Breaking Resitor Connection - gefran AGy-L Series Installation And Commissioning Manual

4.4 VDL200 Power section wiring

4.4.1 VDL200: Power Line – Motor- Breaking Resitor Connection
Power Line Connection
L1 L2 L3 BR C1 C
L1 L2 L3
Breaking Resistor Connection
L1 L2 L3 BR C1 C
Braking resistor
Connection of shielding (recommended)
Optional Power Shield kit:
- Cod. S726101 (sizes 1 and 2)
- Cod. S726501 (size 3)
Loosen the two screws (B), put the metal support (A) (optional, POWER SHIELD KIT) in place and screw down
tightly. Fasten the power cable shield to the omega sections (C) as illustrated in the figure.
• Sizes 4 and 5 : for these sizes the metal support (A) is not provided. Cable shielding must be provided by the installer.
Replace AGy-L by VDL200
D U V W EM
K1M
F1
( 3ph - 23 0 V / 400 V / 460-480 V 50/60 Hz)
,
AC AC AC
D U V W EM
A
Motor Connection
L1 L2 L3 BR C1 C D U
B
C
V W EM
M
3 ph
Pag. 12 of 17