Table of Contents
Advertisement
User Manual PROFINET / J1939 - Converter
Document code: MN67446_ENG
Revision 1.002
Page 27 of 31
Industrial Electronic Devices
3) Connect the PLC to the HD67446 module by drawing the Ethernet wire between the two Ethernet ports. Then assign the IP Address
(1)
defined in the Compositor_SW67446 to the HD67446. Then double click the "Module" (2).
2
1
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67446 and is the answer not in the manual?
Questions and answers