Prestige 100WH Internet Access Router
2.9.2
Advanced WAN Port Setup
The Advanced WAN Port Setup Menu allows you to configure the AT Commands for the
WAN device and the call control parameters.
Step 1.
In Menu 2.1, move the cursor to the Advanced Setup field and press the space bar
to select [Yes], then press [Enter]
Step 2.
When Menu 2.1.1 appears, fill in the appropriate AT commands and call control
parameters, as shown in Figure 2-8.
AT Command Strings:
Dial=atdt
Drop= --+++--ath
Answer= ata
Drop DTR When Hang Up= Yes
AT Response string:
CLID= NMBR
Called= TO
Speed= CONNECT
Chapter 2 Hardware Installation & Initial Setup
2-14
Menu 2.1.1 - Advanced WAN Setup
Enter here to CONFIRM or ESC to CANCEL:
Figure 2-8.
Menu 2.1.1 - Advanced WAN Setup
.
Call Control:
Dial Timeout(sec)= 60
Retry Counter= 0
Retry Interval(sec)= N/A
Drop Timeout(sec)= 20
Call Back Delay(sec)= 15