Lan-To-Lan Application; Figure 6-2. Example Of A Lan-To-Lan Application - ZyXEL Communications ZyXEL Prestige 100WH User Manual

6.2

LAN-to-LAN Application

Your Prestige can also be used as a LAN-to-LAN server. This application allows your
Prestige to connect two geographically separate LANs. For your Prestige to be set up as a
LAN-to-LAN server, you need to configure the Default Dial-In Setup to set the operational
parameters for incoming calls. Additionally, you will have to create a remote node for the
router on the remote network (See Chapter 5 - Remote Node Configuration).
An example of your Prestige being used as a LAN-to-LAN server is shown in Figure 6-2.
Remote Network
Prestige 100WH
Figure 6-2.
Modem / ISDN TA
Modem
Modem / ISDN TA
Modem
ISDN TA
ISDN TA
Example of a LAN-to-LAN Application
Chapter 6 Dial-in Server Applications
Prestige 100WH Internet Access Router
Local Network
LAN-to-LAN
Server
Prestige 100WH
6-3