Figure 31 Wan > Wan Backup Setup > Advanced Setup; Table 16 Wan > Wan Backup Setup > Advanced Setup - ZyXEL Communications P-791R V2 - V3.40 User Manual

Chapter 5 WAN Setup
Figure 31 WAN > WAN Backup Setup > Advanced Setup
The following table describes the labels in this screen.
Table 16 WAN > WAN Backup Setup > Advanced Setup
LABEL
Basic
Authentication
Type
Secondary
Phone Number
Dial Backup Port
Speed
AT Command
Initial String
Advanced
Modem Setup
TCP/IP Options
78
DESCRIPTION
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
CHAP/PAP - Your ZyXEL Device accepts either CHAP or PAP when requested by
this remote node.
CHAP - Your ZyXEL Device accepts CHAP only.
PAP - Your ZyXEL Device accepts PAP only.
Type the backup phone number from the ISP. If the Primary Phone number is busy
or does not answer, your ZyWALL dials the Secondary Phone number, if available.
Some areas require dialing the pound sign # before the phone number for local
calls. Include a # symbol at the beginning of the phone numbers as required.
Select the speed of the connection between the Dial Backup port and the external
device. Available speeds are 9600, 19200, 38400, 57600, 115200 or 230400 bps.
Enter the AT command string to initialize the WAN device. Consult the manual of
your WAN device connected to your Dial Backup port for specific AT commands.
Click Edit to change the advanced settings for the modem.
P-791R v2 User's Guide