Editing Ppp Options; Remote Node Ppp Options Menu Fields - ZyXEL Communications ZyXEL Prestige 100WH User Manual

4.1.2

Editing PPP Options

To edit the remote node PPP Options, move the cursor to the [Edit PPP Options] field in
Menu 11.1 - Remote Node Profile, and use the space bar to toggle and select [Yes], then press
[Enter]. Menu 11.2 appears as shown in Figure 4-3.
Press Space Bar to Toggle.
Figure 4-3.
Table 4-2 describes the Remote Node PPP Options Menu, and contains instructions on how to
configure the PPP options fields.
Table 4-2.

Remote Node PPP Options Menu Fields

Field
Encapsulation
Compression
Once you have completed filling in Menu 11.2 - Remote Node PPP Options, press [Enter] at the
message [Press ENTER to Confirm...] to save your configuration, or press [Esc] at any time to
cancel.
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Press ENTER to CONFIRM or ESC to CANCEL:
Menu 11.2 - Remote Node PPP Options
Description
Select the vendor-specific encapsulation for the link. There are
two options in this field.
l
Standard PPP - Standard PPP options will be used.
l
CISCO PPP - Cisco PPP will be used.
Turn on the Stac Compression. The default for this field is [Off].
Prestige 100WH Internet Access Router
Chapter 4 Remote Node Configuration
4-7