Configuring Tcp/Ip And Dhcp; Figure; Menu 3.2 - Tcp/Ip And Dhcp Ethernet Setup - ZyXEL Communications ZyXEL Prestige 100WH User Manual

Once you have decided on the network number, pick an IP address that is easy to remember,
for example, 192.168.1.1, for your Prestige.
The subnet mask specifies the network number portion of an IP address. Your Prestige will
compute the subnet mask automatically based on the IP address that you entered. You do not
need to change the subnet mask computed by the Prestige unless instructed otherwise.
3.3

Configuring TCP/IP and DHCP

To edit Menu 3.2, select the menu option [3. Ethernet Setup] in the Main Menu. When
Menu 3 appears, select the submenu option [2. TCP/IP and DHCP Setup] and press
. The screen now displays
[Enter]
in Figure 3-3.

Figure 3-3.

DHCP Setup:
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= N/A
Secondary DNS Server= N/A
TCP/IP Setup:
IP Address= 192.68.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Press Space Bar to Toggle.

Menu 3.2 - TCP/IP and DHCP Ethernet Setup

Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Version= RIP-1
Enter here to CONFIRM or ESC to CANCEL:
Prestige 100WH Internet Access Router
Chapter 3 Internet Access Application
, as shown
3-5