Default Dial-In Setup; Figure 6-3. Menu 13 - Default Dial-In Setup - ZyXEL Communications ZyXEL Prestige 100WH User Manual

Prestige 100WH Internet Access Router
6.3

Default Dial-In Setup

This section covers the default dial-in parameters. The parameters in Menu 13 affect incoming
calls from all remote dial-in users and remote nodes until authentication is completed. Once
authentication is completed, and if it matches a remote node, your Prestige will use
parameters from that particular remote node.
Telco Options:
CLID Authen= None
PPP Options:
Recv Authen= CHAP/PAP
Compression= Yes
Mutual Authen= No
PAP Login= N/A
PAP Password= N/A
Callback Budget Management:
Allocated Budget(min)=
Period(hr)=
Press Space Bar to Toggle.
From the Main Menu, enter 13 to go to Menu 13 - Default Dial-in Setup. This section will
describe how to configure the protocol-independent fields in this menu. For the protocol-
dependent fields, refer to the appropriate chapters.
Chapter 6 Dial-in Server Applications
6-4
Menu 13 - Default Dial-in Setup
Press ENTER to CONFIRM or ESC to CANCEL:
Figure 6-3. Menu 13 - Default Dial-in Setup
IP Address Supplied By:
Dial-in User= Yes
IP Pool= No
IP Start Addr= N/A
Session Options:
Input Filter Sets=
Output Filter Sets=
Idle Timeout= 300