Cylinder And Piston - KYMCO K-XCT 125i Service Manual

7
. CYLINDER/PISTON

CYLINDER AND PISTON

REMOVAL
Remove the cylinder head (refer to
"CYLINDER HEAD" section in the chapter
6).
Remove the water hose attached the cylinder.
Remove the two cylinder bolts/washers (2).
Remove the cylinder.
Remove the cylinder gasket (4) and dowel
pins (3).
Clean any gasket material onto the cylinder
surface.
Remove the piston pin clip
＊
Place a clean shop towel in the crankcase
to keep the piston pin clip from falling
into the crankcase.
Press the piston pin out of the piston and
remove the piston .
K-XCT 125i
(4)
(3)
7-4