KYMCO K-XCT 125i Service Manual page 158

5. ENGINE REMOVAL/INSTALLATION
INSTALLATION
Installation is in the reverse order of removal.
Tighten the engine mounting bolt/nut to the
specified torque.
Torque: 5 kgf-m (50 N-m)
Tighten the right and left rear shock absorber
lower mount bolts to the specified torque.
Torque: 4.0kgf-m (40N-m)
Install the rear brake caliper and tighten the
mount bolts to the specified torque.
Torque: 3.2 kgf-m (32 N-m, 23 lbf-ft)
After installation, inspect and adjust the
following:
 Throttle grip free play
 Fill the cooling system with coolant and
start the engine to bleed air from the system.
API/ABV Reset.
5-7
K-XCT 125i