Installation - IKEA RENGORA Manual

ENGLISH
ENGLISH
ENGLISH

Installation

INSTALLATION
INSTALLATION
ATTENTION: If the appliance must be moved at any time, keep it
ATTENTION: If the appliance must be moved at any time, keep
ATTENTION: If the appliance must be moved at any time, keep it
in an upright position; if absolutely necessary, it may be tilted onto
it in an upright position; if absolutely necessary, it may be tilted
in an upright position; if absolutely necessary, it may be tilted onto
its back. onto its back.
its back.
CONNECTING THE WATER SUPPLY
Connecting the water supply
CONNECTING THE WATER SUPPLY
Adaptation of the water supply for installation should only be
Adaptation of the water supply for installation should only be
Adaptation of the water supply for installation should only be
performed by a qualified technician.
performed by a qualified technician
performed by a qualified technician
The water inlet and outlet hoses may be positioned towards the
The water inlet and outlet hoses may be positioned towards the
The water inlet and outlet hoses may be positioned towards the
right or the left in order to achieve the best possible installation.
right or the left in order to achieve the best possible installation.
right or the left in order to achieve the best possible installation.
Make sure the dishwasher does not bend or squash the hoses.
Make sure the dishwasher does not bend or squash the hoses.
Make sure the dishwasher does not bend or squash the hoses.
Connecting the water inlet hose
CONNECTING THE WATER INLET HOSE
• Run the water until it is perfectly clear.
CONNECTING THE WATER INLET HOSE
• Screw the inlet hose tightly into position and turn on the tap.
• Run the water until it is perfectly clear.
• Run the water until it is perfectly clear.
If the inlet hose is not long enough, contact a specialist store or
• Screw the inlet hose tightly into position and turn on the tap.
• Screw the inlet hose tightly into position and turn on the tap.
an authorised technician.
If the inlet hose is not long enough, contact a specialist store or
If the inlet hose is not long enough, contact a specialist store or
The water pressure must be within the values indicated in the
an authorised technician.
an authorised technician.
Technical Data table - otherwise the dishwasher may be function
The water pressure must be within the values indicated in the
The water pressure must be within the values indicated in the
properly.
Technical Data table - otherwise the dishwasher may be function
Make sure the hose is not bent or compressed.
Technical Data table - otherwise the dishwasher may be function
properly.
properly. Make sure the hose is not bent or compressed.
Specifications for the connection of the water
Make sure the hose is not bent or compressed.
SPECIFICATIONS FOR THE CONNECTION OF THE WATER
Water supply
SPECIFICATIONS FOR THE CONNECTION OF THE WATER
WATER SUPPLY
Water intake
WATER INTAKE
WATER SUPPLY
Power of water
POWER OF WATER
WATER INTAKE
Pressure
PRESSURE
POWER OF WATER
PRESSURE
Supply hose:
SUPPLY HOSE:
SUPPLY HOSE:
CONNECTING THE WATER OUTLET HOSE Connecting the water outlet hose
Connect the outlet hose to a drain duct with a minimum
Connect the outlet hose to a drain duct with a minimum diameter
diameter of 2 cm A.
CONNECTING THE WATER OUTLET HOSE
of 2 cm A.
Connect the outlet hose to a drain duct with a minimum diameter
of 2 cm A.
The outlet hose connection must be at a height ranging from The outlet hose connection must be at a height ranging from
40 to 80 cm from the floor or surface where the dishwasher rests 40 to 80 cm from the floor or surface where the dishwasher
Before connecting the water outlet hose to the sink drain, remove rests Before connecting the water outlet hose to the sink drain,
the plastic plug B.
remove the plastic plug B.
The outlet hose connection must be at a height ranging from
40 to 80 cm from the floor or surface where the dishwasher rests
ANTI-FLOODING PROTECTION Anti-flooding protection
Before connecting the water outlet hose to the sink drain, remove
Anti-flooding protection. To ensure floods do not occur, the
Anti-flooding protection. To ensure floods do not occu , the dishwasher
the plastic plug B.
dishwasher is provided with a special system which blocks the
is provided with a special system which blocks the water supply in
water supply in the event of anomalies or leaks from inside the
the event of anomalies or leaks from inside the appliance.
appliance.
ANTI-FLOODING PROTECTION
Some models are also equipped with the supplementary safety
Some models are also equipped with the supplementary safety
device New Aqua Stop, which guarantees anti-flooding protectio
Anti-flooding protection. To ensure floods do not occu , the dishwasher
device New Aqua Stop, which guarantees anti-flooding protectio
even in the event of a supply hose rupture.
is provided with a special system which blocks the water supply in
even in the event of a supply hose rupture.
Under no circumstances should the water inlet hose be cut as it
the event of anomalies or leaks from inside the appliance.
Model has Water protection system Aquastop
contains live electrical parts.
Some models are also equipped with the supplementary safety
Under no circumstances should the water inlet hose be cut as it
device New Aqua Stop, which guarantees anti-flooding protectio
contains live electrical parts.
even in the event of a supply hose rupture.
Under no circumstances should the water inlet hose be cut as it
contains live electrical parts.
cold or hot (max. 60°C)
cold or hot (max. 60°C)
3/4"
3/4"
cold or hot (max. 60°C)
0.05 ÷ 1 MPa (0.5 ÷ 10 bar)
0.05 ÷ 1 MPa (0.5 ÷ 10 bar)
3/4"
7.25 – 145 psi
7.25 – 145 psi
0.05 ÷ 1 MPa (0.5 ÷ 10 bar)
7.25 – 145 psi
MAX 80 cm
MIN 40 cm
MAX 80 cm
MIN 40 cm
ELECTRICAL CONNECTION
Electrical connection
ELECTRICAL CONNECTION
WARNING: Under no circumstances should the water inlet WARNING: Under no circumstances should the water inlet
WARNING: Under no circumstances should the water inlet
hose be cut as it contains live electrical parts.
hose be cut as it contains live electrical parts.
hose be cut as it contains live electrical parts.
Before inserting the plug into the electrical socket, make sure
Before inserting the plug into the electrical socket, make sure that:
Before inserting the plug into the electrical socket, make sure that: that:
• The socket is earth and complies with current regulations;
• The socket is earth and complies with current regulations;
• The socket is earth and complies with current regulations;
• The socket can withstand the maximum load of the
• The socket can withstand the maximum load of the applian-
• The socket can withstand the maximum load of the applian-
appliance as shown on the data plate located on the inside of
ce as shown on the data plate located on the inside of the door
ce as shown on the data plate located on the inside of the door
the door (see PRODUCT DESCRIPTION).
(see PRODUCT DESCRIPTION).
(see PRODUCT DESCRIPTION).
• The power supply voltage falls within the values indicated on
• The power supply voltage falls within the values indicated on • The power supply voltage falls within the values indicated on
the data plate on the inside of the door.
the data plate on the inside of the door.
the data plate on the inside of the door.
• The socket is compatible with the plug of the appliance.
• The socket is compatible with the plug of the appliance.
• The socket is compatible with the plug of the appliance.
If this is not the case, ask an authorised technician to replace the
If this is not the case, ask an authorised technician to replace the
plug (see AFTER-SALES SERVICE). Do not use extension cables
If this is not the case, ask an authorised technician to replace the
plug (see AFTER-SALES SERVICE). Do not use extension ca-
or multiple sockets. Once the appliance has been installed, the
plug (see AFTER-SALES SERVICE). Do not use extension ca-
bles or multiple sockets. Once the appliance has been installed,
power supply cable and the electrical socket should be easily
bles or multiple sockets. Once the appliance has been installed,
the power supply cable and the electrical socket should be easily
accessible.
the power supply cable and the electrical socket should be easily
accessible.
The cable should not be bent or compressed.
accessible.
The cable should not be bent or compressed.
If the power supply cable is damaged, have it replaced by the
The cable should not be bent or compressed.
If the power supply cable is damaged, have it replaced by the
manufacturer or its authorised Technical Assistance Service in
manufacturer or its authorised Technical Assistance Service in If the power supply cable is damaged, have it replaced by the
order to prevent all potential hazards.
order to prevent all potential hazards.
manufacturer or its authorised Technical Assistance Service in
The Company shall not be held responsible for any incidents, if
The Company shall not be held responsible for any incidents, if
order to prevent all potential hazards.
these regulations are not observed.
these regulations are not observed.
The Company shall not be held responsible for any incidents, if
these regulations are not observed.
Positioning and levelling
POSITIONING AND LEVELLING
1. Position the dishwasher on a level sturdy floor. If the floor i
1. Position the dishwasher on a level sturdy floo . If the floor i
uneven, the front feet of the appliance may be adjusted until
POSITIONING AND LEVELLING
uneven, the front feet of the appliance may be adjusted until
it reaches a horizontal position. If the appliance is levelled
1. Position the dishwasher on a level sturdy floo . If the floor i
it reaches a horizontal position. If the appliance is levelled
correctly, it will be more stable and much less likely to move
uneven, the front feet of the appliance may be adjusted until
correctly, it will be more stable and much less likely to move or
or cause vibrations and noise while it is operating.
it reaches a horizontal position. If the appliance is levelled
cause vibrations and noise while it is operating.
2. Before recessing the dishwasher, stick the adhesive
correctly, it will be more stable and much less likely to move or
transparent strip under the wooden shelf in order to protect
2. Before recessing the dishwasher, stick the adhesive transparent
cause vibrations and noise while it is operating.
it from any condensation which may form.
strip under the wooden shelf in order to protect it from any con-
3. Place the dishwasher so that its sides or back panel are in
densation which may form.
2. Before recessing the dishwasher, stick the adhesive transparent
contact with the adjacent cabinets or the wall. This appliance
3. Place the dishwasher so that its sides or back panel are in
strip under the wooden shelf in order to protect it from any con-
can also be recessed under a single worktop.
contact with the adjacent cabinets or the wall. This appliance
densation which may form.
4. To adjust the height of the rear foot, turn the red hexagonal
can also be recessed under a single worktop.
3. Place the dishwasher so that its sides or back panel are in
bushing on the lower central part at the front of the
4. To adjust the height of the rear foot, turn the red hexagonal
contact with the adjacent cabinets or the wall. This appliance
dishwasher using a hexagonal spanner with an opening of 8
bushing on the lower central part at the front of the dishwasher
can also be recessed under a single worktop. mm. Turn the spanner in a clockwise direction to increase the
using a hexagonal spanner with an opening of 8 mm. Turn the
height and in an anticlockwise direction to decrease it.
4. To adjust the height of the rear foot, turn the red hexagonal
spanner in a clockwise direction to increase the height and in
an anticlockwise direction to decrease it. bushing on the lower central part at the front of the dishwasher
using a hexagonal spanner with an opening of 8 mm. Turn the
Dimensions and capacity:
DIMENSIONS AND CAPACITY:
spanner in a clockwise direction to increase the height and in
an anticlockwise direction to decrease it. Width
WIDTH
Height
HEIGHT
DIMENSIONS AND CAPACITY:
DEPTH Depth
WIDTH
CAPACITY
Capacity
HEIGHT
DEPTH
CAPACITY
598 mm
598 mm
820 mm
820 mm
555 mm 555 mm
598 mm
13 standard place-settings
13 standard place-settings
820 mm
555 mm
13 standard place-settings
16