Figure 13-13 Command Mode; Command Interpreter Mode; Call Control - ZyXEL Communications Prestige 480 User Manual

Prestige 480 Dual BRI ISDN Router

13.5 Command Interpreter Mode

This option allows you to enter the command interpreter mode(CI). A list of valid commands can be found
by typing [help] at the command prompt. For more detailed information, check your PNC installation disc or
Copyright (c) 1994 - 1999 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
ip
visit the ZyXEL Web site or send e-mail to the ZyXEL Support Group.

13.6 Call Control

The Prestige provides four call control functions: call control parameters, blacklist, budget management and
call history.
Call control parameters allows you to set a dial out time limit, the number of times a number should be called
before it is added to the blacklist and the interim between calls.
The budget management function allows you to set a limit on the total outgoing call time of the Prestige over
a period of time. When the total outgoing call time exceeds the limit, the current call will be dropped and any
future outgoing calls will be blocked.
The blacklist function prevents the Prestige from re-dialing to an unreachable phone number. It is a list of
phone numbers, up to a maximum of 14, to which the Prestige will not make an outgoing call. If the Prestige
tries to dial to a phone number and fails a certain number of times (configurable in Menu 24.9.1), then the
System Maintenance
Enter Menu Selection Number: 8
exit ether

Figure 13-13 Command Mode

isdn
13-17