ZyXEL Communications Prestige 480 User Manual page 180

Prestige 480 Dual BRI ISDN Router
Speed
TxPkts
RxPkts
Errors
CLU
ALU
Up Time
Ethernet
Status
TxPkts
RxPkts
Collisions
LAN Packet
Which Triggered
Last Call
Total Outcall Time
CPU Load
Press Command:
COMMANDS
1
2
3
4
5
6
9
ESC
13-4
Shows the current connecting speed.
Shows the number of transmitted packets on this channel.
Shows the number of received packets on this channel.
Shows the number of error packets on this channel.
(Current Line Utilization) percentage of current bandwidth used on this channel
(Average Line Utilization) a 5-second moving average of channel usage for this
channel.
Shows the time this channel has been connected to the current remote node
(Ethernet connection).
Shows the current transmission speed and mode of the LAN.
Shows the number of transmitted packets to the LAN.
Shows the number of received packets from the LAN.
Shows the number of collisions.
Shows the first 48 octets of the LAN packet that triggered the last outgoing call.
Shows the total outgoing call time for both B1 and B2 channels since the system
has been powered up.
Specifies the percentage of CPU utilization.
Drops the B1 channel of ISDN line 1.
Drops the B2 channel of ISDN line 1.
Drops the B1 channel of ISDN line 2.
Drops the B2 channel of ISDN line 2.
Resets counters means that all statistics, except Uptime are reset to zero.
Drop All means all ISDN line channels are dropped.
Toggles status means you can see alternative information such as the Prestige IP
address and CLID as well as the peer's IP address and CLID (see next figure).
Exits this menu and takes you back to the previous menu.
System Maintenance