ZyXEL Communications Prestige 480 User Manual page 74

Prestige 480 Dual BRI ISDN Router
Field Description
IP Alias Choose Yes to configure the LAN network for the Prestige.
IP Address Enter the IP address of your Prestige in dotted decimal notation
IP Subnet Your Prestige will automatically calculate the subnet mask based
Mask on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige
RIP Direction Press the space bar to select the RIP direction from Both/In
Only/Out Only.
Version Press the space bar to select the RIP version from RIP-1/RIP-
2B/RIP-2M.
Incoming Enter the filter set(s) you wish to apply to the incoming traffic
Protocol Filters between this node and the Prestige.
Outgoing Enter the filter set(s) you wish to apply to the outgoing traffic
Protocol Filters between this node and the Prestige.
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm...] to save
your configuration, or press [Esc] at any time to cancel.
3-10
IP Alias Setup Menu Fields
Example
Yes
192.168.2.1
255.255.255.0
Both
RIP-1
Internet Access