ZyXEL Communications Prestige 480 User Manual page 113

Prestige 480 Dual BRI ISDN Router
The table below describes the IPX-specific parameters of the remote node setup.
Field
Description
Dial-On- This field is necessary for your Prestige on the client side. When set to
Query Yes, any Get Service SAP or RIP broadcasts will trigger your Prestige to
make a call to that remote node.
Rem LAN In this field, enter the internal network number of the NetWare server on
Net # the remote LAN.
My WAN In this field, enter the network number of the ISDN link. If you leave this
Net # field as 00000000, your Prestige will determine automatically the network
number through negotiation with the PPP peer.
Hop Count This field indicates the number of intermediate networks that must be
passed through to reach the remote node.
Tick Count This field indicates the time-ticks required to reach the remote node.
W/D This field is for the Prestige on the server side. Your Prestige can spoof a
Spoofing response to a server's WatchDog request after the connection is
(min) dropped. In this field, type in the time (number of minutes) that you want
your Prestige to spoof the WatchDog response.
SAP/RIP This field indicates the amount of time that you want your Prestige to
Timeout maintain the SAP and RIP entries learned from this remote node in its
(min) internal tables after the connection has been dropped. If this information
is retained, then your Prestige will not have to get the SAP information
when the line is brought back up. Enter the time (number of minutes) in
this field.
Once you have completed filling in the Network Layer Options Menu, press [Enter] to return to Menu 11.1.
Then press [Enter] at the message [Press ENTER to Confirm] to save your configuration, press [Esc] to
cancel.
IPX Configuration
Remote Node Novell IPX Options
Option
Yes/No
00000000
(default)
1
(default)
2 (default)
6-9