ZyXEL Communications Prestige 480 User Manual page 122

Prestige 480 Dual BRI ISDN Router
The following table describes the Bridge Static Route Menu.
Field Description
Route Name Enter a name for the bridge static route for identification purposes.
Active Activate/deactivate the static route.
Ether Address Enter the MAC address of the destination machine that you wish to bridge the packets
to.
IP Address If available, enter the IP address of the destination machine that you wish to bridge
the packets to.
Gateway Node Enter the number of the remote node that is the gateway of this static route. When a
packet's destination Ethernet (MAC) address matches the value entered above, it will
trigger a call to this remote node.
Once you have completed filling in this menu, press [Enter] at the message [Press ENTER to Confirm...]
to save your configuration, or press [Esc] to cancel.
7-6
Bridge Static Route Menu Fields
Bridging Setup