Troubleshooting - Kathrein UFSconnect 926 Quick Start Manual

9

Troubleshooting

The Receiver Is Not Responding, or the
TV Set Display Remains Blank
Possible causes
The mains plug or the antenna cable are
not connected or the mains plug is not
correctly plugged into the mains socket
The receiver and TV set are connected
incorrectly
An incorrect input is selected on the TV
set
The receiver and/or the TV set are not
switched on or are in the stand-by mode
The receiver and/or TV set are not
responding to the remote control
Several or All Channels Are Not Shown
Possible causes
The tuner is incorrectly set
There is a channel outage
Remedy
Check the mains plug and the antenna
cable as well as the mains plug connec-
tion
Connect the receiver and TV set accord-
ing to Fig. 8, P. 17.
Select the input on the TV set which the
receiver is connected to
Turn on the receiver and the TV set
see The Receiver is not Responding to the
Remote Control, p. 28
Remedy
● Check the tuner settings (Main
Menu ▶ Settings ▶ Antenna & Satel-
lites ▶ Tuner Configuration).
● Call an antenna specialist
Make sure there is no outage in your area
27 of 32