Contrast Adjustment; Time Delay; Time, Date And Dst Settings; Time & Date Settings - Tecnosicurezza DigiTech User Instructions

DigiTech

Contrast adjustment

Power up the keypad. Press and hold
Press and hold again
Enter a value 1÷8 to select a different contrast level which will be quickly applied. Press
to confirm or to exit.

Time delay

Power up the keypad. Press and hold
Enter Manager code. LCD shows the current values for time delay and
open window.
Press to exit or
Enter the new values and press
Time delay can be set in between 0 and 99 minutes, the open window in between 1 and 19
minutes instead.
To set a time delay shorter than the one curretly present, lock must be open.

Time, Date and DST settings

This menu allows for adjusting the current time and date. It also allows for enabling and
disabling the DST (Daylight-Saving-Time). For further information concerning this option,
please refer to the user manual IU_DigiTech_setup_XX or contact Tecnosicurezza.
Power up the keypad. Press and hold
Time & Date settings
Enter the Manager code. LCD shows:
Press . LCD shows the current time and date.
Press again to change time and date.
IU_DigiTech_04
. LCD shows:
. LCD shows:
. LCD shows:
to set new values.
to confirm. LCD shows:
. LCD shows:
User instructions
DigiTech v 1.00
21/02/12
ADJUST CONTRAST
1 2 3 4 5 6 7 8
SET TIME DELAY
01 – X X X X X X
TIME DELAY 00
OPEN WINDOW 01
TIME DELAY mm
OPEN WINDOW mm
VALUES UPDATED
TIME AND DATE
0 1 – X X X X X X
TIME AND DATE
SETTINGS
08:00 FRI
27/01/2006
hh:mm _ _ _
GG / MM / YYYY
13 of 16