Lock Opening; Pre-Setup Mode; Manager (01) And Users (02-29); Override User - Tecnosicurezza DigiTech User Instructions

User instructions
Time Delay
Programmable time delay in between 0 and 99 minutes. Programmable opening window in
between 1 and 19 minutes.
Dallas keys
Available as option for Manager and users.
Power supply
Lock can be powered with:
• an ALKALINE 9V battery located in the battery compartement below the keypad;
• an internal battery box provided by Tecnosicurezza (6 ALKALINE 1.5 batteries);
• A power adapter (ref. N1212) with power supply interface (ref. T6005/W or T6005) both
provided by Tecnosicurezza.
Low battery warning
A long beep together with the message "LOW BATTERY" on the display, indicate a low battery
level which need immediate replacing.
Audit
The lock is able to save the last 5500 operations with time, date, user and operations
description.
IMPORTANT
Some options/characteristics reported in this user manual, can only be used if previously
enabled through the setup software. Thus, please refer to the user manual
IU_DigiTech_setup_XX.
Please contact Tecnosicurezza for further information.

Lock opening

Pre-setup mode

Power up the keypad. The Display shows:
Press to open the lock.

Manager (01) and users (02-29):

Power up the keypad and enter an opening code. LCD shows:

Override user (30)

Power up the keypad and enter an override user code code (enter also
the Dallas key if set). LCD shows:
Open the lock within 3 seconds.
8 of 16
DigiTech
PRESS 1
TO OPEN
OPEN
OPEN
IU_ DigiTech_04