General Information - Tecnosicurezza DigiTech User Instructions

DigiTech

General information

Using your keypad
• Press any button to power up the keypad. LCD which shows:
If the lock is in pre-setup mode, LCD shows:
• To enter a code, power up the LCD and enter the corresponding
digits.
• LCD automatically switches OFF if no buttons are pressed
within 30s.
• To scroll the menu, press
• To confirm an operation, press
• To leave a menu or come back to the main menu, scroll the
functions until "EXIT?" and press
• To enter a code plus Dallas key (if set), enter the code digits and
insert the Dallas key in the keypad reader.
• To enter a user provided with Dallas key only (if set), insert the
Dallas key in the keypad reader. LCD shows:
• To start a time delay counting (if set), enter a code. LCD shows:
• To stop a time delay counting, press
After the time delay counting, LCD shows open window
counting:
Press and enter a code for opening.
IU_DigiTech_04
.
.
.
and then confirm with
User instructions
ENTER CODE
X X – X X X X X X
PRESS 1 TO OPEN
DALLAS USER
XX
TIME DELAY
00:59
STOP DELAY
COUNTING?
OPEN WINDOW
00:01
5 of 16