Figure 23 Station Mode: Profile: Select A Channel - ZyXEL Communications ZyXEL ZyAIR G-220F User Manual

ZyXEL G-220F User's Guide
Table 12 Station Mode: Profile: Add New Profile (continued)
LABEL
SSID
Network Type
Next
Exit
Scan Info
,
,
or
SSID
Scan
Select
2 If you select the Infrastructure network type in the previous screen, skip to step 3. If
you select the Ad-Hoc network type in the previous screen, a screen displays as follows.
Select a channel number and wireless LAN mode and click Next to continue.

Figure 23 Station Mode: Profile: Select a Channel

45
DESCRIPTION
Select an available wireless device in the Scan Info table and click Select, or enter
the SSID of the wireless device to which you want to associate in this field
manually. Otherwise, leave this field blank to have the ZyXEL G-220F associate to
or roam between any infrastructure wireless networks.
Select the Infrastructure radio button to associate to an AP. Select the Ad-Hoc
radio button to associate to a peer computer.
Click Next to go to the next screen.
Click Exit to go back to the previous screen without saving.
This table displays the information of the available wireless networks within the
transmission range.
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless security
is deactivated.
This field displays the SSID (Service Set IDentifier) of each wireless device.
Click Scan to search for available wireless devices within transmission range.
Select an available wireless device in the table and click Select to add it to this
profile.
Whenever you activate this profile, the ZyXEL G-220F associates to the selected
wireless network only.
Chapter 3 Wireless Station Mode Configuration