Figure 21 Profile: Wireless Setting: Select A Channel - ZyXEL Communications G-302 v3 User Manual

Table 11 Profile: Add New Profile (continued)
LABEL
Network Type
Next
Exit
Scan Info
,
,
or
SSID
Scan
Select
2 If you select the Infrastructure network type in the previous screen, skip to step 3. If you
select the Ad-Hoc network type in the previous screen, a screen displays as follows.
Select a channel number and click Next to continue.

Figure 21 Profile: Wireless Setting: Select a Channel

Chapter 3 ZyXEL Utility Configuration
DESCRIPTION
Select the Infrastructure radio button to associate to an AP. Select the Ad-Hoc
radio button to associate to a peer computer.
Click Next to go to the next screen.
Click Exit to go back to the previous screen without saving.
This table displays the information of the available wireless networks within the
transmission range.
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless security
is deactivated.
This field displays the SSID (Service Set IDentifier) of each wireless device.
Click Scan to search for available wireless devices within transmission range.
Select an available wireless device in the table and click Select to add it to this
profile.
Whenever you activate this profile, the G-302 v3 associates to the selected
wireless network only.
ZyXEL G-302 v3 User's Guide
45