The Mac Filter Screen - ZyXEL Communications ZyXEL ZyAIR G-220F User Manual

ZyXEL G-220F User's Guide
Table 16 Access Point Mode: Configuration (continued)
LABEL
Pass Phrase
Transmit Key
Key x (where x is a
number between 1
and 4)
Save
Cancel

4.4 The MAC Filter Screen

The MAC Filter screen allows you to configure the ZyXEL G-220F to give exclusive access
to (Accept) devices or exclude devices from (Reject) connecting to the ZyXEL G-220F. Every
Ethernet device has a unique MAC (Media Access Control) address. The MAC address is
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. You need to know the MAC address of the device(s) to configure this
screen.
53
DESCRIPTION
When you select the radio button, enter a passphrase of up to 63 case-sensitive
printable characters. As you enter the passphrase, the ZyXEL G-220F
automatically generates four different WEP key and displays it in the key field
below. Refer to Section 2.2.1 on page 27 for more information.
At the time of writing, you cannot use passphrase to generate 256-bit WEP keys.
Select a default WEP key to use for data encryption. The key displays in the field
below.
Select this option if you want to manually enter the WEP keys.
Enter the WEP key in the field provided.
If you select 64 Bits in the WEP field.
Enter either 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example, 11AA22BB33) for HEX key type
or
Enter 5 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey) for ASCII key type.
If you select 128 Bits in the WEP field,
Enter either 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey12345678) for ASCII key type.
If you select 256 Bits in the WEP field,
Enter either 58 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example,
0000111122223333444455556666777788889999AAAABBBBCCCC000011)
for HEX key type
or
Enter 29 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey111122223333444455556678) for ASCII key type.
Note: The values for the WEP keys must be set up exactly the
same on all wireless devices in the same wireless LAN.
ASCII WEP keys are case sensitive.
Click Save to save the changes.
Click Cancel to discard the changes.
Chapter 4 Access Point Mode Configuration