Figure 31 Access Point Mode: Mac Filter; Table 17 Access Point Mode: Mac Filter - ZyXEL Communications ZyXEL ZyAIR G-220F User Manual

Figure 31 Access Point Mode: MAC Filter

The following table describes the labels in this screen.

Table 17 Access Point Mode: MAC Filter

LABEL
Filter Type
Filter MAC
Address 1-16
Save
Cancel
Chapter 4 Access Point Mode Configuration
DESCRIPTION
Define the filter action for the list of MAC addresses in the MAC address filter table.
Select Disable to deactivate the MAC filter feature.
Select Reject to block access to the ZyXEL G-220F, MAC addresses not listed will
be allowed to access the ZyXEL G-220F.
Select Accept to permit access to the ZyXEL G-220F, MAC addresses not listed
will be denied access to the ZyXEL G-220F.
Specify the MAC address(es) of the wireless station(s) that is allowed or denied
association to the ZyXEL G-220F.
Enter six pairs of hexadecimal digits (separated by colons) in the range of "A-F",
"a-f" and "0-9" (for example, 00:A0:C5:00:00:02).
If you enter an invalid MAC address, once you click Save to save the values, a
warning screen will be displayed.
Click Save to save the changes back to the ZyXEL G-220F.
Click Cancel to discard the changes.
ZyXEL G-220F User's Guide
54