Figure 21 Station Mode: Profile: Select A Channel - ZyXEL Communications ZyAIR B-220 User Manual

ZyAIR B-220 User's Guide
Table 12 Station Mode: Profile: Add New Profile (continued)
LABEL
Scan Info
,
,
or
SSID
Scan
Select
2 If you select the Infrastructure network type in the previous screen, skip to step 3. If
you select the Ad-Hoc network type in the previous screen, a screen displays as follows.
Select a channel number and click Next to continue.

Figure 21 Station Mode: Profile: Select a Channel

43
DESCRIPTION
This table displays the information of the available wireless networks within the
transmission range.
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless security
is deactivated.
This field displays the SSID (Service Set IDentifier) of each wireless device.
Click Scan to search for available wireless devices within transmission range.
Select an available wireless device in the table and click Select to add it to this
profile.
Whenever you activate this profile, the ZyAIR associates to the selected wireless
network only.
Chapter 3 Wireless Station Mode Configuration