Figure 19 Station Mode: Security Settings: Wpa-Radius: Authentication; Table 9 Station Mode: Security Settings: Wpa-Radius: Authentication - ZyXEL Communications ZyXEL ZyAIR G-220F User Manual

ZyXEL G-220F User's Guide
3.3.2.3.2 Authentication

Figure 19 Station Mode: Security Settings: WPA-RADIUS: Authentication

The following table describes the labels in this screen.

Table 9 Station Mode: Security Settings: WPA-RADIUS: Authentication

LABEL
Authentication
Type
Login Name
Password
Certificate
Browse
Validate Server
Certificate
PEAP Inner EAP
Save
41
DESCRIPTION
Select an authentication method from the drop down list. Options are EAP-TLS
and EAP-PEAP.
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
This field is not available when you select EAP-TLS in the Authentication Type
field.
Enter the password associated with the user name above.
This field is only available when you select EAP-TLS in the Authentication Type
field.
Specify the location and name of a certificate in the Certificate field or click
Browse to locate it.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
This field is only available when you select EAP-TLS in the Authentication Type
field.
Click this button to display the Select Certificate screen, select a certificate and
click OK.
Select the check box to check the certificate of the authentication server.
This field is only available when you select EAP-PEAP in the Authentication
Type field.
Use the drop-down list box to select a PEAP protocol. Options are MD5
CHALLENGE, TOKEN CARD and MS CHAP v2.
Click Save to save the changes back to the ZyXEL G-220F and display the Link
Info screen. Otherwise, click the close (
back to the Site Survey screen.
) button to discard changes and go
Chapter 3 Wireless Station Mode Configuration