The Adapter Screen; Figure 27 Station Mode: Profile: Activate The Profile; Figure 28 Station Mode: Adapter; Table 14 Station Mode: Adapter - ZyXEL Communications ZyXEL ZyAIR G-220F User Manual

Figure 27 Station Mode: Profile: Activate the Profile

3.5 The Adapter Screen

To set the advanced features on the ZyXEL G-220F, click the Adapter tab.

Figure 28 Station Mode: Adapter

The following table describes the labels in this screen.

Table 14 Station Mode: Adapter

LABEL
Adapter
Transmission Rate Select a transmission speed from the drop-down list box. Choose from Fully Auto
Preamble Type
Power Saving
Mode
Chapter 3 Wireless Station Mode Configuration
DESCRIPTION
(default), 1 Mbps, 2 Mbps, 5.5 Mbps, 6 Mbps, 9 Mbps, 11 Mbps, 12 Mbps, 18
Mbps, 24 Mbps, 36 Mbps, 48 Mbps, and 54 Mbps.
Select a preamble type. Choices are Long Preamble, Short Preamble and
Auto.The default setting is Auto.
Refer to Section 2.4 on page 30
Select Enabled to save power (especially for notebook computers). This forces
the ZyXEL G-220F to go to sleep mode when it is not transmitting data.
When you select Disabled, the ZyXEL G-220F will never go to sleep mode.
ZyXEL G-220F User's Guide
for more information.
48