Figure 32 Station Mode: Profile: Select A Channel - ZyXEL Communications G-220F User Manual

Table 12 Station Mode: Profile: Add a New Profile (continued)
LABEL
Scan Info
,
,
or
SSID
Scan
Select
2 If you select the Infrastructure network type in the previous screen, skip to step 3. If you
select the Ad-Hoc network type in the previous screen, a screen displays as follows.
Select a channel number and click Next to continue.
Note: To associate to an ad-hoc network, you must use the same channel as the peer
computer.

Figure 32 Station Mode: Profile: Select a Channel

Chapter 4 Wireless Station Mode Configuration
DESCRIPTION
This table displays the information of the available wireless networks within the
transmission range.
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless security
is deactivated.
This field displays the SSID (Service Set IDentifier) of each AP or peer device.
Click Scan to search for available wireless devices within transmission range.
Select an available wireless device in the table and click Select to add it to this
profile.
Whenever you activate this profile, the AG-220 associates to the selected wireless
network only.
ZyXEL AG-220 User's Guide
55