Security Settings; Wep Encryption; Figure 16 Station Mode: Security Settings: Wep; Table 6 Station Mode: Security Settings: Wep - ZyXEL Communications ZyXEL ZyAIR G-220F User Manual

3.3.2 Security Settings

When you configure the ZyXEL G-220F to connect to a network with wireless security
activated and the security settings are disabled on the ZyXEL G-220F, the screen varies
according to the encryption method used by the selected network.

3.3.2.1 WEP Encryption

Figure 16 Station Mode: Security Settings: WEP

The following table describes the labels in this screen.

Table 6 Station Mode: Security Settings: WEP

LABEL
Security Settings
WEP
Authentication
Pass Phrase
Transmit Key
Chapter 3 Wireless Station Mode Configuration
DESCRIPTION
Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Select Disable to deactivate WEP encryption.
Select an authentication method. Choices are Auto, Shared Key and Open
System. Refer to Section 2.3 on page 30
When you select the radio button, enter a passphrase of up to 63 case-sensitive
printable characters. As you enter the passphrase, the ZyXEL G-220F
automatically generates four different WEP keys and displays it in the key field
below. Refer to Section 2.2.1 on page 27 for more information.
At the time of writing, you cannot use passphrase to generate 256-bit WEP keys.
Select a default WEP key to use for data encryption. The key displays in the field
below.
ZyXEL G-220F User's Guide
for more information.
38