Ad-Hoc; Access Point Mode; Figure 1 Application: Infrastructure; Figure 2 Application: Ad-Hoc - ZyXEL Communications ZyXEL ZyAIR G-220F User Manual

ZyXEL G-220F User's Guide

Figure 1 Application: Infrastructure

1.1.1.2 Ad-Hoc

In case you prefer to set up a small independent wireless workgroup without an AP, use the
Ad-Hoc mode.
Ad-hoc mode does not require an AP or a wired network. Two or more wireless clients
communicate directly to each other.

Figure 2 Application: Ad-Hoc

1.1.1.3 Access Point Mode

You can set the ZyXEL G-220F in access point mode. The following figure shows a network
example.

Figure 3 Application: Access Point Mode

In the example, the ZyXEL G-220F is installed on computer A and set to operate in access
point mode. Computer A shares Internet connection to the wireless LAN, so wireless stations
B and C can access the Internet.
19 Chapter 1 Getting Started