Back To Factory Defaults; Restart Screen - ZyXEL Communications NWA1120 Series User Manual

The NWA automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 66 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default NWA IP address (192.168.1.2). See
Appendix A on page 129

11.8.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and
returns the NWA to its factory defaults as shown on the screen. The following screen will appear.
Figure 67 Reset Message
You can also press the RESET button to reset your NWA to its factory default settings. Refer to
Section 2.2 on page 20

11.9 Restart Screen

Use this screen to reboot the NWA without turning the power off.
Click Maintenance > Restart. The following screen displays.
Figure 68 Maintenance > Restart
Click Restart to have the NWA reboot. This does not affect the NWA's configuration.
NWA1120 Series User's Guide
for details on how to set up your computer's IP address.
for more information.
Chapter 11 Maintenance
121