Security: Wpa-Psk, Wpa2-Psk, Wpa2-Psk-Mix - ZyXEL Communications NWA1120 Series User Manual

The following table describes the labels in this screen.
Table 19 Security: WPA/WPA2 for Wireless Client
LABEL
Security Settings
Profile Name
Security Mode
Data Encryption
IEEE802.1x Authentication
Eap Type
User Information
Username
Login Name
Password
Certificate
User Certificate
Back
Apply
Cancel

6.6.3 Security: WPA-PSK, WPA2-PSK, WPA2-PSK-MIX

Use this screen to employ WPA-PSK, WPA2-PSK or WPA2-PSK-MIX as the security mode of your
NWA. Select WPA-PSK, WPA2-PSK or WPA2-PSK-MIX in the Security Mode field to display the
following screen.
Figure 33 Security: WPA-PSK, WPA2-PSK or WPA2-PSK-MIX
NWA1120 Series User's Guide
DESCRIPTION
This is the name that identifying this profile.
Choose the same security mode used by the AP.
This shows the encryption method used by the NWA.
The options on the left refer to EAP methods. You can choose either TLS, LEAP, PEAP or
TTLS.
If you select TTLS or PEAP, the options on the right refer to authentication protocols. You
can choose between PAP, CHAP, MSCHAP, MSCHAPv2 and/or GTC.
Supply the user name of the account created in the RADIUS server.
Supply the password of the account created in the RADIUS server.
If you select TLS, enter the name of the certificate used to to verify the identity of clients.
Click Back to return to the previous screen.
Click Apply to save your changes.
Click Cancel to begin configuring this screen afresh.
Chapter 6 Wireless LAN
81