Take
The take interface is shown as the figure below:
Set transition time, and the adjustment range is 0~10S.
Slide the black out switch to enable or disable the black function. Auto take on is the default state. If
select black out and auto take on, the preview image will black or seamless switch to LED display
instantaneously.
Click "Cut" or "Take", the preview will be cut or seamless switch to LED display.
Admin
Click the "Admin", and enter the interface as follows:
Role management and rights management are included in access control, specific as follows:
© Xiamen RGBlink Science & Technology Co., Ltd.
39 / 46
Ph: +86 592 5771197 |
|
support@rgblink.com
www.rgblink.com