Table of Contents
Advertisement
Select Ethernet and enter its sub-menu, then select IP
and IP of the device will be found.
Connect the PC which XPOSE runs on the PC with the CAT5 cable or USB cable as I n the Box to the
D6. Power on D6 and ready to make the remote set up and configuration.
Then, click the shortcut "Search" on the operation interface.
Then it will search the D6,
and show the D6 info, including the serial number and IP address, shown as the picture here:
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
Ethernet
DHCP
IP
Subnet Mask
Gateway
State
support@rgblink.com
>>
>>
>>
>>
>>
|
www.rgblink.com
13 / 46
Advertisement
Table of Contents
