Table of Contents
Advertisement
Click on signal shortcut, It displays the input module type, the quantity of inputs and input format. Right
click the input for the following settings:
Change Name: Select "New Name", and input the new name, click "OK" after setting.
Set Input Property: Right click the input and select "Input Property".
Layer split/merge: Right click the input, select layer split/ layer merge.
Set 4K signal source: Right click the input, select "4K", Choose "Input Module" and "Work Mode" and
Input 1 Type, then click "Set".
Refresh Signals: Right click the input and select "Refresh Signals". If there is signal, it will show the
input format, or it will show "No Input".
© Xiamen RGBlink Science & Technology Co., Ltd.
25 / 46
Ph: +86 592 5771197 |
|
support@rgblink.com
www.rgblink.com
Advertisement
Table of Contents
